Internal Dental Handpiece Electric Motor | Handpiece Motor Supplier

Technical parameters

Motor: brushless DC motor

Type: internal water spray

Application: dental restoration-dental calculus removal

Speed range: 2000 rpm-40000 rpm

Max torque: 3.5 N.cm

Torque control: no

Input voltage: AC24V

Output power: 120W

Water flow: (0.2Mpa): ≥65ml/min

Temperature rise: 40000rpm running 3 min, no more than 10° higher than the room temperature

Noise: ≤45dB

Light source: LED

Light source luminance: >7000LUX

Bearing: lubricating free ball bearing

Disinfection: 135°C high temperature disinfection

Port: DC male connector 5.5mm*2.1mm

Net weight of the motor: 63.4g

Motor dimension: diameter 21mm*70.5mm (exposed dimension: 21mm*40.6mm)

Net weight of the control box: 296g

Driving board: 120*110*23mm

Voltage boosting board: 85*52*30mm

Dimension of the control box: 135*63*19mm

Gross weight of the product: 1KG

Guarantee time: 2 years

Product features

• The internal dental handpiece electric motor is an original Swiss brushless DC motor of which the running noise is as low as 45dB while the output torque is up to 3.5N.cm. (The largest torque of the famous brand in Japan NSK is 3.4N.cm. And the torque of the others is 2.5N.cm.)
• The motor is equipped with built-in high luminance cool color LEDs of which the luminance can be up to 7000LUX. The luminance can be increased or reduced according to the practical requirements, so that the doctors can accomplish the treatment under the most suitable conditions.
• The internal electric motor has four connecting modes: 1:1, 16:1, 20:1, 1:5. Motor with different speed ratio can be matched with different handpiece. Thus, it can realize different functions and applications according to the customers’ requirements.
• The LED digital screen display can show the speed in real time, so the speed can be controlled precisely. With the additional sensitive touch screen, you can accurately adjust the speed of the motor according to relative buttons on the control panel. So the product can be more intelligent and humanized. It can satisfy requirements of different therapy.
• The American intelligent chip: the control box has built-in American control chip with intelligent program which is improved by several times, thus ensuring that the motor can run normally in any hostile environment. The chip also has the complete self repairing ability to ensure perfect running of the machine.
• The built-in design: the water and static proof circuit board is installed in the treatment table. The motor can be precisely controlled via the control panel in real time. When the user want to change the treatment table, you just need to pull out the connecting terminals. The operation is simple and convenient.

Related Products

dental Equipment, teeth Drill, handpiece, dental Drill